How to Enable Network Discovery in Windows 10?

Network discovery is a property that makes the device displayed to the rest of the devices and can search other devices on the network. For making a network, devices require to search the rest of the devices on that network itself and connect with them. This feature is helpful in some places only.

The method disabling network discovery in your Windows 10 device

  • Firstly, write Control Panel on the Windows Search bar.
  • Then, view the Control Panel.
  • Next, put the view by Category.
  • After that, see the Network and Internet option.
  • Then, press on Network and Sharing Center.
  • Next, press on Changed advanced sharing settings.
  • Lastly, you shall be able to view the Change sharing option for different network profiles.

The method of enabling network discovery in your Windows 10 device for Private Networks

  • Firstly, press on Private for expanding.
  • Then, switch on or off network discovery according to the need. If you wish to enable it, then you need to press on Turn on automatic setup of network-connected devices.

The method turning on/off network discovery in your Windows 10 device for Public Networks

  • Firstly, press on Guest or Public (Current Profile).
  • Same as a private network, switch network discovery on/off according to the need.
  • Lastly, press on Save Settings to saving the modifications.

The method of using Command Prompt for turning off/on the network discovery

Go through the given below steps:

  • Firstly, write ‘CMD’ on the Windows Search bar.
  • Then, do a right click on the ‘Command Prompt’ option.
  • After that, choose ‘Run as Administrator’.
  • An alternative way put the combination of Windows+R buttons for running prompt. Write ‘CMD’ and put the combination of ‘Control+Shift+Enter’ for running the it in admin mode.
  • Write the given below order for switching off the network discovery.
  • netsh advfirewall firewall set rule group=”Network Discovery” new enable=No
  • Write the given below order for enabling the network discovery
  • netsh advfirewall firewall set rule group=”Network Discovery” new enable=Yes

Fixing Network Discoverability Issues

By chance, your device is not displayed to the rest of the devices even after going through the above-mentioned ways, then have a look at the options for fixing the issue.

Windows Firewall putting a limitation on Network discovery

  • Firstly, visit Control Panel.
  • Then, view System and Security option.
  • After that, press on Windows Defender Firewall.
  • Next, go to the left panel and press Allow and app or feature through Windows Defender Wall.
  • Move downward for checking network discovery and turn on the checkbox if you wish to enable it.
  • Go to the left panel and press Windows Defender Firewall On/Off.

Bella Williams, an employee currently living in USA and working at a top email service provider company in the day, and a technical writer at night. I am passionate about writing troubleshooting tips, beginner’s guides, news, and other articles on varied topics like canon printer support, Dell Printer Support, Epson Printer Support etc.

How to Register and Play Halo: Reach Early on your Computer

Halo: The Master Chief Collection is about to release. This time Microsoft Studios is launching the game for Windows 10 and Steam. Earlier the game Halo: The Master Chief Collection is only available for the Xbox One console. But now the PC gamers can also play and enjoy this game on their system. It is an FPS (First Person Shooter) game, which can be played single player as well as multiplayer. Players who want to play the pre-release of the game can register themselves for Halo insider program. Here is how to register and play Halo: Reach early on your Computer.

Signing up for Halo Insider program

In order to become a Halo Insider, players need to sign up on the Halo Waypoint website. Since the enrolling process requires signing into Xbox Live with the Microsoft account and filling out a form with personal and few other details. The registrants should already have signed up on Microsoft. The players who are interested in early Halo: The Master Chief Collection can sign up on Microsoft and then register on the Halo Waypoint website. Here is how.

1. Go to “https://www.halowaypoint.com/en-us/community/halo-insider” to visit the Halo Insider registration page of Halo Waypoint website.

2. Click the ‘SIGN UP’ button under BECOME A HALO INSIDER heading.

3. Then click on ‘SIGN IN To CONTINUE’ button near the top. This will open the Xbox Live sign-in form and ask you to sign in with your Microsoft account.

4. Fill in the blank fields with the required info, click ‘Next,’ and then click ‘Sign in.’

5. Allow the Halo Waypoint to access your Xbox Live account details when requested.

6. After that, view the Confidentiality Statement of Halo Insider Program and agree to them.

7. Confirm your age, to register for Halo Insider program you must be above 18 years old.

8. Then, select the ‘Join the Program’ option. This will open a form with various blank fields.

9. Enter the asked info into the provided box.

10. Then click on ‘Continue.’

11. Choose ‘No, not at this time’ option when appear.

12. Again, click on ‘Continue.’

13. On the PC FLIGHTING heading, click the ‘Yes’ option.

14. And then click the ‘Continue’ button.

15. Now, open ‘Start’ and search for ‘dxdiag.’

16. Click on ‘Yes’ on the confirmation window.

17. DirectX Diagnostic Tool window will open on the screen, click on ‘Save All Information’ button, and save the file on your device.

18. Now go back to the sign-up page of Halo waypoint in the browser, click on the ‘Choose File’ button and choose the downloaded text file.

19. Then select the option to ‘Link Steam Account.’

20. When the Steam login window opens, fill up the details you used to sign in to your Steam account.

21. Click the ‘Sign In’ option to link your Steam account to the Halo Insider profile.

22. Now, you need to choose your Input devices and audio options.

23. Then click ‘Continue.’

24. Enter the further required details and click on ‘Complete Sign-Up’ option.

25. Now, open the email you provided on the Halo Waypoint website.

26. View the Halo Insider email and select the ‘Verify my Email Address’ option to finish signing up for halo Insider program.

Now, you’re all set for the early fights of Halo: Reach.

Bella Williams, an employee currently living in USA and working at a top printer service provider company in the day, and a technical writer at night. I am passionate about writing troubleshooting tips, beginner’s guides, news and other articles on varied topics like Dell Printer Support, sony printer support, Kyocera Printer Support etc.

How to Fix HP Printer Won’t Scan Windows 10?

Top Ways to Troubleshoot HP Printer Scanning Issues

HP is an excellent printer brand for Windows 10. HP also manufactures multifunction printers which can scan documents as well. However, sometimes, it stops working normally. Often, users face this issue after updating their computer. If you are facing the same issue, then do not worry. Just read on.

Best ways to troubleshoot HP printer that stop scanning

Reset your printer

  • Firstly, switch off the printer, unplug its cable.
  • After that, plug in the printer and switch it on after 20 minutes.

Install the HP printer software

After completing the upgrade, prefer installing HP printer software to your Windows 10 device.

  • Firstly, right-click on the Start option.
  • Then, press on Run.
  • Next, put ‘appwiz.cpl’ on the given bar.
  • After that, press on OK.
  • Then, choose the HP printer software present on the Programs and Features Control Panel applet.
  • Next, choose Uninstall.
  • Press on Yes for offering further confirmation.
  • After that, restart the Windows 10 as soon as the un-installation of the HP printer software gets over.
  • Then, you need to delete the printer from Printers and scanners option in the ‘Settings.’ For doing it, go to Cortana after pressing the combination Windows key+ Q keyboard shortcut.
  •  Next, write ‘printers’ in the search bar.
  • Then, press Printers and scanners for visiting the Window.
  •  After that, choose the printer, and press its Remove device option. Remember that the printer needs to be turned on whenever you choose that option.
  •  Next, follow the instructions for removing the printer.
  •  Then, visit the HP support page.
  •  After that, press on Printer for opening a search bar.
  •  Next, click on the Submit option.
  •  Press on Change to choose a 64 or else 32-bit Windows model on the pull-down menu.
  •  Next, click on the Change option.
  •  Press on Download for downloading the ‘driver and software package.’
  •  Then, go to the place wherever that driver and software package has been downloaded to.
  •  After that, click on the downloaded and software package for installing it.

Resetting HP Printer and Scanner to the factory default setting

  • Most of the times, users choose a ‘Reset Factory Defaults’ option in the ‘Setup’ or else ‘Tools’ menus. It shall be found on the control panel of the printer.
  • Have a look at the printer’s manual for knowing the way of resetting it to the factory default.

Bella Williams, an employee currently living in USA and working at a top printer service provider company in the day, and a technical writer at night. I am passionate about writing troubleshooting tips, beginner’s guides, news and other articles on varied topics like hp printer support, Xerox Printer Support, Lexmark Printer Support etc.

How to Split Screen on Facebook Live?

The Facebook live feature is becoming popular nowadays. But there is a need to develop it more. This feature allows you to add any other person on the Facebook live stream as a broadcaster. It also lets you stream from a private profile or business page. If you want to know the steps to split screen on Facebook Live, then go through the steps mentioned in this article.

Steps to go live

·       Open the Facebook app.

·       Click on the Status bar.

·       It is a place where you usually write the status.

·       You need to go to the menu list.

·       It is located at the end of the display.

·       Choose the “Live Video” option.

·       Now, Facebook will access the camera in case you have not done it yet.

Here are the steps you need to do before going live:

·       Start adding the description to the Facebook Live video.

·       You need to tag that person which you want to send the invitation

·       In case you are using your   Facebook profile for going live, then select which follower you want to show the stream to.

·       By going to the upper left-hand side of the screen, press on the “To” option.

·       Here, you can select the “Public,” “Friends,” “Friends of Friends” option.

·       In case you want to stream to the Facebook group, then you can also complete this procedure.

·       In case you want to stream from your business webpage, then the stream should be set into the public.

·       You can change the audience name through the Facebook Audience Restrictions.

·       Click on the Round option.

·       It resembles a three dots symbol.

·       It is located in the center in the end right-hand side of the display.

·       Turn on the “Geo Controls” option.

·       Start using the Locations option.

·       You should have the Facebook application updated version on the smartphone.

·       Launch the Facebook application.

·       If you are the broadcaster, then all the connections get disconnected and the stream will end.

·       You need to restart the Live video through WiFi.

·       After selecting the video orientation, exit from all streams.

Here are some of the things you should keep in mind:

·        There is no limitation when you are talking about live viewers.

·        But you can’t choose many guests.

·        For removing the guest, you need to press on the X key.

·        It is located in the upper right-hand side of the guest area of the display.

·        In case you have already selected one guest, then you can select any other guest also.

·        Alternatively, start inviting the webpage.

·        But it also lets you watch the live video.

·        If you have already selected the guest, then you can also apply filters.

Bella Williams, an employee currently living in USA and working at a top printer service provider company in the day, and a technical writer at night. I am passionate about writing troubleshooting tips, beginner’s guides, news, and other articles on varied topics like dell printer support, Sony Printer Support, Kyocera Printer Support etc.

Apple TV Plus: Price and Launch Date

Apple is set to release its streaming services in November 2019, and it will reportedly come at an initial price of $9.99 per month.

The company has yet to make any announcement on the say about the price and availability of the streaming service, despite announcing the streaming platform back in March 2019. Now the upcoming release slots put the streaming service head-on against Disney’s forthcoming streaming platform Disney Plus. Launching as a rival to Disney Plus will be a gigantic task as the streaming service is coming with huge franchises under its belt. Disney Plus will include MCU, Pixar, Star Wars, and Disney Films in it. There will be several originals too, one of them being a Star Wars original.

Apple reportedly is looking at a $50 billion income in the annual revenue services by the end of 2020. So the release of the streaming platform will be an integral part of it. The service is set to begin with mere five shows.

  • The Morning Show: Starring Reese Witherspoon and Jennifer Aniston.
  • Jason Momoa Aquaman.
  • Truth be told featuring Octavia Spencer.
  • The revival of Amazing Stories by Steven Spielberg.
  • A documentary by the name Home.

The lineup does not seem very strong when compared to its rivals, but the company has stated to release several other shows. The company, however, has tempted some big names like Oprah Winfrey, who would bring two separate documentaries to Apple TV Plus. Apple reportedly has already spent millions of dollars on the original five shows it intends to debut with.

Apple reported investing over $6 billion for original content, which is a humongous leap over it initially pledged $1 billion two years ago. But the amount still fades away in the light of Netflix’s $14 billion spending this year along with Disney’s expected $24 billion expenses. Disney has set the amount for the stream release and also for the theatrical release.

With that being said, Apple is not looking to launch any bundle later this year, which will surely make its five-show plan at the price of $10 per month a very hard sell. While its competitor Disney Plus is releasing with an initial amount of $6.99 a month, Disney Plus will also be available with ESPN’s stripped version and Hulu for a minimal price of $12.99 a month.

If Apple wants to keep up with the competition, then it has to come up with improvised bundles and price strategies.

Bella Williams, an employee currently living in USA and working at a top printer service provider company in the day, and a technical writer at night. I am passionate about writing troubleshooting tips, beginner’s guides, news and other articles on varied topics like xerox printer support, Panasonic Printer Support, Lexmark Printer Support etc.

Resetting Your AirPods is Easy- Here’s How to Do it?

Apple AirPods are the best wireless earbuds in the world. But a few users have found that their AirPods are not working well after a year. However, after resetting them, the problem was solved. So, if your Apple AirPods also have started acting up, then you can reset them to solve the problem. Today we are going to tell you how to reset AirPods. So, let’s get started.

Unpairing the AirPods

In order to reset your AirPods entirely, you should unpair your AirPods from your device. It is not a requirement to reset your AirPods from your device, but Apple says that you should remove them from your account.

As mentioned above, make sure to unpair from all devices such as your Android phone, PC, and more. This will ensure that your earbuds behave as new ones. This article is focused on iOS devices, but the procedure for any other devices is also the same.

If you are planning to buy pre-owned earbuds, and you haven’t used them yet with your device, then you can leave this step.

  1. First jump to the Settings on your device.
  2. Now navigate to the Bluetooth settings.
  3. After that, find your Apple earbuds from the paired devices.
  4. Tap on the “i” button beside the earbuds name.
  5. There choose the “Forget This Device” option on your device.

This will unpair your earbuds from your iPhone, iPad, and other smartphones. Your AirPods don’t need to be connected to your device while unpairing. You can unpair them whether you are connected or disconnected from your device. 

How to Reset Your AirPods Completely?

Now you can clean and reset you old AirPods with ease. Before resetting, place them inside the charging case and keep the cap closed for 30 seconds or more.

After that, open the case’s cap and then turn its back. Look for the setup button on the backside of your AirPods case. Now long-press the setup key and then you will see the status light blinking continuously. The process will last for only 20 seconds at max. After the notification light gets normal, that means the process of resetting has been completed.

Now, after the reset, you will experience a change in the performance of your AirPods as they will become like the new ones.

The issues like slow charging, connectivity issues, unable to pair and more problems will be gone. The AirPods software will be renewed after a reset. That means if your device is older than a year, then you should reset yours to clean the minor bugs and issues.

Bella Williams, an employee currently living in USA and working at a top email service provider company in the day, and a technical writer at night. I am passionate about writing troubleshooting tips, beginner’s guides, news and other articles on varied topics like Brother Printer Support, Kodak Printer Support, Samsung Printer Support etc.

How to Disable Ads on Google Chrome?

Are you annoyed by the ads that pop up on your screen while surfing? If you use Google Chrome, then you can block these annoying advertisements. Let’s see how.

Through Settings on Desktop

If you want to disable Ads on Google Chrome using Settings, you need to follow the steps given below.

  • Firstly, you have to launch Google Chrome on your desktop.
  • After that, you should click on the vertical ellipsis menu icon from the right-hand side of the screen.
  • Then you should click on Settings.
  • Thereafter, you have to move down and click on the “Advanced” option.
  • Later, you should scroll down and click on “Content Settings” in “Privacy and security section.
  • Now, you have to click on “Ads.”
  • After that, you should switch the toggle of “Blocked on sites that tend to show intrusive ads (recommended).”
  • Then you have to click on the back-arrow icon.
  • Thereafter, you should click on Popups.
  • Later, you have to switch the toggle of “Block (recommended).”
  • Now, you have successfully turned off pop up ads in Google Chrome.

 Through Settings on Mobile

You can disable pop-ups ads on mobile. Here are the instructions are given below.

  • Firstly, you have to launch the Google Chrome app on your device.
  • After that, you should click on the vertical ellipsis menu icon.
  • Then you should select Settings from the drop-down menu.
  • Thereafter, you have to tap on “Content Settings” for (iPhone) or “Site settings” for (Android).
  • Later, you should tap on “Block Pop-ups for (iPhone) or Pop-ups for (Android).
  • Now, you have to switch the toggle of “Block Pop-ups or Pop-ups.”

Through AdBlock on Desktop

If you want to disable Ads on Google Chrome using AdBlock, you need to follow the steps given below.

  • Firstly, you have to go to Google Chrome on your desktop.
  • After that, you should visit http://www.getadblock.com site.
  • Then, you have to click on “GET ADBLOCK NOW.”
  • When the prompt comes, click on “Add extension.”
  • Thereafter, you should click on the AdBlock icon.
  • Later, click on Options.
  • Now, you have to click on “FILTER LISTS” options.
  • After that, you should untick the box of “Acceptable Ads.”
  • Then you have to tick additional ad-blocking options. For example.
  1. Adblock Warning Removal list.
  2. Antisocial filter list.
  3. EasyPrivacy.
  4. Fanboy’s Annoyances.
  5. Malware protection.
  6. Now, you have to close the AdBlock tab.

Through AdBlock Plus on Desktop

You can disable pop-ups ads using AdBlock plus. Here are the instructions are given below.

  • Firstly, you should have to go to Google Chrome on your desktop.
  • After that, you should visit http://www.adblockplus.org site.
  • Then, you should click on “Agree and Install for Chrome.”
  • When the prompt comes, click on “Add extension.”
  • Thereafter, you have to click on the AdBlock Plus icon.
  • Later, you should click on “Options.”
  • Now, you have to untick the box of “Allow Acceptable Ads.”
  • After that, you have to close the AdBlock Plus tab.

Bella Williams an employee currently living in USA and working at a top email service provider company in the day, and a technical writer at night. I am passionate about writing troubleshooting tips, beginner’s guides, news, and other articles on varied topics like HP Printer Support, Brother Printer Support, Ricoh Printer Support etc.

Critical Security Flaw Detected in VLC Media Player

VLC, a popular media player, is now in the headlines, due to all the wrong reasons. A software vulnerability has been detected in this open-source program, and this could potentially impact millions of people.

This security flaw was detected by researchers at CERT-Bund. According to the researchers, VLC, which hit the three billion downloads milestone earlier this year, has a flaw that might enable miscreants to access the compromised user’s devices. While this flaw has not been exploited as of now, it does pose a threat for VLC users.

As per the firm, this vulnerability allows RCE, unauthorized modification along with disclosure of data. This vulnerability is labeled CVE-2019-13615 and is was detected in the most recent version of VLC Media Player – 3.0.7.1.  

In case VLC media player is still installed on your device, then you may prefer to remove it on a temporary basis as the VideoLAN does not have a patch for the detected flaw. As this vulnerability permits remote code execution, attackers can access your device and do stuff without your permission or knowledge. This flaw can be used to denial-of-service attacks as well.

However, if you have VLC installed on your Mac, then you do not have to worry as only Windows, Linux, and Unix versions are affected.

What can you do?

You should go to the bug’s initial filer’s concept video and download it. Then, play it and check if your VLC media player crashes or not. According to reports, VLC version 3.0.7 underwent crashes. However, it is not necessary that your VLC will crash too.

Moreover, you should take note than VideoLAN states that the bug cannot be reproduced, and it does not crash the media player. The developers of VLC are not happy as they nobody contacted them regarding the security flaw before publishing.

The Register has reported that the crash is caused by a proof-of-concept video which exploits the flaw. But, as per VideoLAN, the crash cannot be reproduced and only works once the feature named Loop Pine is turned on the Windows version of VLC.

You just need to keep an eye on the ChangeLog of VLC and wait for a new version to be released. Also, ensure that you always download the most recent updates for the media player. Open VLC click on Help and select Check for Updates. Also, you should enable the Activate Updates Notifier feature by going to the Settings option in VLC media player. This way, you will get notifications as and when a new version is available.

Bella Williams, an employee currently living in USA and working at a top email service provider company in the day, and a technical writer at night. I am passionate about writing troubleshooting tips, beginner’s guides, news and other articles on varied topics like Ricoh Printer Support, HP Printer Support, Lexmark Printer Support etc.

How to Install and Setup a VPN on Your Mac?

A VPN application is used for browsing the Internet anonymously, and to enhances your internet browsing experience by unblocking content and increasing overall speed. It hides your internet protocol address, which prevents your internet providers from tracking your online activity. You can even access the geo-restricted content on your Mac. So overall, installing and setting up a VPN on your Mac can be beneficial for you, especially when you are a superuser or a technology enthusiast.

It is easier to setup a VPN service on a Mac than you think. Today we will tell you how to setup one for your Mac. Let’s get started.

First Step: Decide a VPN Service

We’ll have to select a VPN service, in order to use it because there are various VPN services on the internet which makes harder to choose the best one. Mostly you will find the same locations and features in VPNs. Every premium Virtual Private Network provides normal functions such as encryption protocols, performance, speed and locations. Yes, you will see certain features different from other VPN services. Below are some important things which will help you in selecting a VPN for your Mac.

  • Internet Surfing Privacy: Every VPN is designed to protect and hide your privacy. While choosing a VPN, check their functions such as VPN data logging policies, the limit of allowable connections, encryption protocols (Open works better), torrenting support, service level, browser extensions, and VPN provider’s jurisdiction.
  • Media Streaming Support: Most of the VPN services claim they can unlock content like Netflix, Amazon Prime and more. Many of the companies are offering a money-back guarantee if their service failed to satisfy you.
  • Torrents Sites Allowable: Most of the VPN brands claims to unlock all torrents sites, but they actually fail to open such content in many countries. Check if they are really providing the best service for torrenting.

Setting Up a VPN Using Your Mac’s Inbuilt VPN Feature

Do you know your Mac has a VPN setup feature in it?  To setup VPN on your Mac using the preinstalled feature, follow the tutorial given below:

  1. Navigate to the Apple icon on the top-left of your screen and tap System Preferences.
  2. Now select Network.
  3. Navigate to the ‘+’ button at the bottom-right of your display.
  4. Tap at the “Interface” option and then select VPN from the list.
  5. Select VPN type from the drop-down. For instance, we will choose the L2PT.
  6. Now provide a service name for your connection (You can enter anything you want).
  7. Hit the Create button.
  8. Type Service Address and the Account Name, sometimes you will find them asking for a username instead of the Account Name.
  9. Hit the ‘Authentication Settings’ option to move further.
  10. Now type your Password and then Shared secret in their respective locations.
  11. Click the OK button.
  12. Now tap the ‘Apply’ button and then hit the Connect button.
  13. Finally, you got connected to your VPN successfully and from now you’ll be able to browse privately and safely.
  14. To disconnect from the VPN connection, press the Disconnect button on the same tab.

Bella Williams, an employee currently living in USA and working at a top email service provider company in the day, and a technical writer at night. I am passionate about writing troubleshooting tips, beginner’s guides, news and other articles on varied topics like Panasonic Printer Support, HP Printer Support, Lexmark Printer Support etc.

Temple Run 2: Tips, Tricks, and Strategies to Play Like a Pro

Temple Run is a popular mobile game that has breathtaking visuals, and the plot is full of twists and turns. Its sequel Temple Run 2 has just got even better. The 3D graphics, sound effects, and plot appear even more natural and epic. I am a Temple Run 2 enthusiast and want to guide people who are willing to master this game. So, let’s explore the Temple Run 2 tips and tricks and a strategy to play at a peak level.

Temple Run 2 Tips and Tricks

  • As a player in the game, our goal is to be alive as long as we can. We also have the opportunity to collect money and become rich. But I would recommend not to focus on coins. This practice can get you killed in a few minutes.
  • To stay longer in a run, try to focus on the covered distance.
  • Cover long distance as much as possible in a single run.
  • Never leave the Green color gems because they can be used to resurrect your character.
  • Keep your eyes on the obstacles coming your way and be ready before they get close.
  • When you get far enough in the game, the obstacles become more dangerous and quicker. So, to avoid them, try to focus on obstacles and be prepared. Also, look for the obstacles which are away from you.
  • Try to learn to jump and turn left and right at the same time. Also, learn the same while sliding.
  • Basically, the green gems and other power ups are placed just after an obstacle. So, to collect them, you should make a turn while jumping and sliding.
  • Never collect the coins when an intersection comes up.
  • When you get enough coins to choose abilities, always buy “Coin Value.” The more coins you earn, the more abilities you can opt. So at least get to the level 3 in Coin Value and then think about buying the other abilities.

Temple Run 2 Power-Ups and Avatars

The default character or avatar in Temple Run 2 is Guy Dangerous. But, later on, after earning a lot of achievement and coins, one can go for the new avatars. You can select the different avatar from the game menu.

Every avatar has unique powerup and ability. It is worth to unlock these characters to experience unique powers. And once these characters are, their power ups can be used with any avatar. So, you can choose a specific powerup in any avatar.

Temple Run 2 Avatars and Their Abilities

  • Guy Dangerous: Unique Ability: Can Create a Shield that is strong enough to protect you from obstacles.
  • Scarlett Fox: Unique Ability: Boost in speed.
  • Barry Bones: Unique Ability: Coin bonus.
  • Karma Lee: Unique Ability: Score Bonus.

That’s it. I hope this article will help you master Temple Run 2.

Bella Williams, an employee currently living in USA and working at a top email service provider company in the day, and a technical writer at night. I am passionate about writing troubleshooting tips, beginner’s guides, news, and other articles on varied topics like Epson Printer Support, HP Printer Support, Lexmark Printer Support etc.